壁掛式廣告機的安裝步驟：
Installation procedure of wall mounted advertising machine:
1、 打開包裝，取出廣告機， 平放于桌面或者其它安全位置.；
1, open the packaging, take out the advertising machine, put it on the table or other safe place.
2、拿出鑰匙， 打開廣告機下面的擋板；
2, take out the key and open the baffle under the advertising machine.
3、用工具把打開的擋板下的螺絲擰下來，放 置于一邊.，取下背面的壁掛；
3. Screw down the screws under the open baffle by means of tools and place them on one side. Remove the hanging wall on the back.
4、用電鉆在墻面上打孔，打好后用螺絲刀把壁掛板固定于墻壁；
4. Drill holes on the wall with electric drill, then use the screwdriver to fix the wall hanging board on the wall.
5、將壁掛廣告機固定在壁掛板上；
5. Fix the wall mounted advertising machine on the wall hanging board.
6、擰緊之前取下的擋板下的螺絲， 鎖上擋板插上電源即可。
6. Tighten the screws under the baffle before tightening, lock the baffle and plug in the power supply.
安裝時注意事項：
Points for attention during installation:
1、墻面：壁掛式安裝對墻面牢固程度有較嚴格的要求，該考察場所墻壁的水泥結構是否牢固，是否安全。
1. Wall surface: wall hanging installation has stringent requirements on the firmness of the wall, the site to investigate whether the cement structure of the wall is firm, whether it is safe.
2、環境周圍環境：安裝環境一定不能潮濕，不宜長期放在潮濕的環境里，這樣安裝位置過于接近濕氣會損壞廣告機。
2. Environment around the environment: the installation environment must not be damp, not long-term in the humid environment, such installation location too close to humidity will damage the advertising machine.
3、避免強電磁場物體：盡量避免強電以及強電磁場物體的影響。
3, avoid strong electromagnetic field objects: try to avoid strong electricity and strong electric magnetic field objects.